How to Apply Stickers

Our Rock Art Stickers are cut from very high-quality, exterior-grade, 3M vinyl and can last for years exposed to the elements if applied properly. Go slow to achieve the best results. Apply your Rock Art Sticker when the temperature is 40 degrees F or above.

Choose any hard surface to apply your Rock Art Sticker. Clean and dry the chosen application area thoroughly.

Your sticker is sandwiched between the sticky-backed top sheet and plastic backing. Prepare your Rock Art Sticker for application by firmly rubbing a credit card (or a similar plastic object) across the top sheet. This makes the sticker adhere to the top sheet better.

Separate the top sheet and sticker from the backing. The sticker should lift with the top sheet. If the sticker clings to the backing, slowly replace the top sheet and repeat the previous step.

Place the sticker and top sheet onto the chosen surface and rub the top sheet again with a plastic card to ensure a proper bond.

Slowly peel the top sheet off at an angle. Be careful not to pull the sticker off the chosen surface. If the sticker pulls away from the surface repeat the previous step. Enjoy your new Rock Art Sticker!